Connecting powered speakers to a mic

Powered speakers are by far the most common speakers for events and functions. They are cheaper, less complicated, and relatively easier to use. This makes them popular among persons with no relevant technical skills and expertise.

For these reasons, chances are that you will often have to utilize them every quite often. It is because of this that you badly want to know how to connect them to a microphone. The conversations that follow below dare to explain just that. In this article, you will learn more on connecting powered speakers to a mic

Step I: Set the Microphone in Place

Start off by placing the microphones in place. Fix them on a stand where the person to use them is likely to be based. This location has to be as far away from the speakers as possible to avoid any interferences. Use a designated stand for the job to be assured to best possible outcomes.

Step II: Connect the Microphone Cable to the Mixer or Preamp

Now proceed to connect the microphone cable to the mixer or preamp preferably at input one. It is this cable that shall relay the electrical signals from the microphone to the amplifier. Tune the connection finely to ensure smooth flow of the signals at all times. Check out for any breaks on the cable and repair them accordingly. This is to prevent shocks ad compromise of the sound quality.

Step III: Connect the Mono Output to the Mono Input of the Amplifier

You now have to connect the mono output of the preamp or mixer to the mono input of the amplifier. This step is optional because it is not always that you will want the sound output amplified. It is nevertheless crucial since you never know what demands a speaker may impose on you. Take great care that you fine-tune the connections appropriately at this stage as well.

Step IV: Connect the Output Channels of the Amplifier to the Powered Speakers.

Establish a connection now between the output channels of the amplifier with the powered speakers. Use two separate cables to connect to the two kinds of speakers i.e. the left and the right speakers, respectively. Proceed to fine-tune the connections to be able to ensure a consistent and smooth sound output.

Step V: Install the Powered Speakers Accordingly

Lastly, set the powered speakers accordingly. Generally speaking, they have to be at a safe distance apart from each other. This is to avoid interference and ensure a fair distribution of the sound output in the entire hall or room. Needless to say, they have to be at the front of the audience to minimize any distortions or disturbances.


You are now good to go! You should now finish off by setting the levels. To do this, turn your amplifier slowly to up the volume until you attain the most suitable listening volume. You should consider fine-tuning the amplifier to get rid of any background noise and interferences. If you so desire, you may also mix some other signals and sound inputs at this stage.